Planning on installing a security alarm system in your home for family safety? If this is your first time, you might be wondering about the best practices for installing them. For tips on how to keep your family and property safe, check out these 5 security alarm and installation tips:

1. Cover All Possible Areas Of Entry With Sensors

How effective your security alarm system is, depends on the placement of the sensors. Ensuring you cover all areas of entry improves family safety considerably. Make sure every window and door, even ones that you barely use, has a sensor.

If your system comes with motion detectors, you should cover areas such as the stairs, garages, rooms, and the main hall.

2. Inspect Security Alarm Systems Regularly

You don’t want your security alarm system to fail when you need it the most. Always make sure everything is working. Check the battery levels of all your sensors and cameras (if they run on battery power). Replace or recharge them if they don’t have sufficient power.

Clear out any old recordings which are no longer relevant to make space for new videos. Also, make sure you test out all the motion sensors by walking in front of them.

3. Keep The Control Panel And Keypad Out Of Plain Sight

To improve the effectiveness of the security alarm, you should pay attention to where you install the control panel and keypad. Make sure you place them in a location where they aren’t visible to the burglar. In other words, it has to be inside your house, away from the entrances and windows.

If the control panel and keypad are visible to the burglar, they know whether your system is disabled or armed. They can create a plan to enter your house without triggering the alarm. If there is a cover for the keypad, make sure you close it when it isn’t in use.

4. Ensure Adequate Internet Coverage Throughout The House

Smart alarm systems require a strong internet connection to be effective. A common mistake people make is they connect it with their existing router. The Wi-Fi signal might be strong enough to watch your favorite shows and movies in your bedroom. However, this may not be the case for your security alarm system. Making sure the internet coverage is seamless is one of the best support tips for family safety. You can use heatmapping software to ensure there are zero issues with the Wi-Fi signal.

5. Make Sure Your Internet Speed Is Excellent

If anyone connected to your Wi-Fi is watching a video, TV show, or movie in 4K, it slows down the speed for other users and devices. One of the best support tips to ensure you don’t face this problem is to boost your Wi-Fi speed.

There are several ways you can go about this. You can upgrade to a faster plan, ensuring the speed is sufficient to handle loads from multiple devices. You can also try boosting your Wi-Fi speeds with these three techniques.

Conclusion

These are the 5 security alarm system installation and support tips. They can help keep your family safe from criminals and give you peace of mind. We hope that you have benefited from these 5 tips and are ready to implement them.

With the speed and accessibility of the internet at almost every person’s fingertips, businesses are quickly realizing the importance of free and fast Wi-Fi for customers. From restaurants to retail shops to law firms, having a strong and stable connection is becoming a must-have for customers. Here are 3 easy ways to boost your office Wi-Fi speeds:

1. Set Up The Guest Wi-Fi

This is the most basic remedy to boost your office Wi-Fi speed. Many guests coming to your office will expect to get access to the Wi-Fi. Some of these guests will even rely on the office Wi-Fi to get their business documents from the cloud or maybe reply to emails.

Well, whatever the case might be, it’s always a great idea to offer guest Wi-Fi instead of giving access to your company network.

Here are two reasons for it:

Don’t think you’re being stingy. You’re just ensuring that a visitor doesn’t accidentally disturb any operations at your office by streaming an FHD video or downloading a large-sized file.

2. Boost The Signal

Another great way to boost Wi-Fi speeds in your office is by using a signal booster. This way, the compensation for barriers such as walls and frequency of the same wavelength, will be done and the WiFi signal strength would be good.

A signal booster amplifies the Wi-Fi signals coming from the router. This way the Wi-Fi signals cover most of your office’s area.

It’s also advised to strategically place the signal booster so it can easily receive good signals from the router and transmit it (amplified) to the office spaces where your router couldn’t reach earlier.

3. Ensure Wi-Fi Signals Are Strong – Wi-Fi Heat Mapping

Wi-Fi heat mapping allows you to find blind spots in your WiFi signal.

Did you know? Physical objects, as well as non-physical signals, can hamper the Wi-Fi signal strength.

Due to these interferences, some areas within your office may receive poor Wi-Fi signals. Some common issues caused by it include dropouts, slow internet speeds, dead zones, etc.

However, WiFi heat mapping will allow you to build visual images of the signal strength at different locations within your office. The visual interpretation is usually done in four colors: red, orange, yellow, and green.

The yellow & orange colors represent average Wi-Fi signal strength, red stands for low or zero access to Wi-Fi signals, and the green represents perfect Wi-Fi signals.

You can use WiFi heat mapping technology to find weak Wi-Fi signal strength areas within your office and use remedies such as signal boosting, relocation of the router, etc.

Conclusion

In today’s time, access to a high-speed internet connection has become a necessity, especially at offices. Therefore, businesses are realizing the importance of implementing remedies to boost their office Wi-Fi speeds.

We hope the 3 ways to boost your office Wi-Fi speeds we discussed above helped you. But if nothing works, you may consider upgrading your router technology.

Making sure that every area in your office has a seamless high-speed internet connection is made easy with the Ekahau Heatmapping Software. A part of Ekahau Connect, the complete suite of hardware and software tools for promoting perfect Wi-Fi access. The Ekahau Heatmapping Software is a free tool for 802.11a/b/g/n Wi-Fi networks.

What is Wi-Fi Heatmapping?

Access to perfect Wi-Fi signal strength can be affected by a wide range of factors. Such as physical objects or non-physical interfering signals.

Due to this interference, certain areas within your office could suffer from a bad Wi-Fi signal. Common issues include dead zones, dropouts, or low internet speeds.

Wi-Fi Heatmapping allows you to create visual images of the signal strength in different areas of your office. This is usually shown in four colors – green, yellow, orange, and red. The color green stand for perfect Wi-Fi strength and high-speed internet connectivity. Yellow and orange stand for average strength signals. Red stands for low or no access to Wi-Fi signals.

The Ekahau Wi-Fi coverage and mapping tool allow you to easily upload your office layout on to the software. Then you can survey the area to see locations that have a great signal and pinpoint areas that are suffering from poor Wi-Fi access. With this information, you can now take steps to ensure that great Wi-Fi access is available anywhere in your office and promote high-speed signal and strength everywhere within your layout.

How Can Ekahau Heatmapping Software Help You?

Ekahau Heatmapping software comes with Wi-Fi heatmaps and coast to coast IT Field Services and Support.

Ekahau Heatmapping software also fully works with other software in the Ekahau Connect suite.

You can:

Wi-Fi Heatmaps let you locate problem areas within your office. It also provides you with visual data on the kind of Wi-Fi strength that’s available across your space. The Ekahau Heatmapping software comes with a very simple user interface and is free to use. It can automatically locate nearby access points and also detects their security settings. This information tells you how best you can correct your Wi-Fi signal strength to provide high performing and high-speed internet connection across your office space.

How Do You Use Ekahau Heatmapping Software?

Ekahau Heatmapping software can be downloaded for free. Once you’ve installed it on your device, you’ll have to upload a layout of your office space.

When the layout has been uploaded, you’ll have to walk around to survey the office area with the device on which Ekahau Heatmapping software has been installed.

Ekahau Heatmapping software will automatically locate the nearest access points, plot the signal strength, and generate a Heatmap of the area.

The green areas on the Heatmap will show perfect signal strength, while the red areas show poor signal strength and Wi-Fi performance. Once you know the location of the areas where Wi-Fi signal strength is bad, you’ll be able to determine what is interfering with the signal strength.

After Heatmapping, you can turn to Ekahau Connect. The all-inclusive suite contains everything you need to diagnose, analyze, boost and optimize seamless Wi-Fi access throughout your office area.

Conclusion

We hope we have explained the benefits of using Ekahau Heatmapping Software to boost your Wi-Fi Signals. We encourage you to download this software and start seeing the benefits today!